REYNAERS ALUMINIUM / Aluminium doors

ConceptSystem 77

A thermally broken Reynaers door system with a 68 mm frame. The Functional variant provides a glazed entrance with dedicated door geometry, requiring checks for daily operating loads and perimeter sealing.

Official profile cutaway — Reynaers ConceptSystem 77
Manufacturer’s profile cutaway / system render. Reynaers Aluminium ↗

SPECIFICATIONS

ConceptSystem 77 / Functional

Manufacturer’s catalogue figures, checked 5 September 2026.
Frame depth68 mm
Door leaf depth68 mm
Min. frame–leaf sightline, inward opening144 mm
Leaf width, catalogue range500–1400 mm
Max. leaf height3000 mm
Uf — best catalogue value1.8 W/m²K
Ud — reference door below1.4 W/m²K
Air tightness4 (600 Pa)
Water tightness7A (300 Pa)
Wind load resistanceC2 (800 Pa)
Acoustics Rw(C;Ctr)41(−1;−4) dB

What these values apply to

Ud = 1.4 W/m²K refers to a single inward-opening door: 1.23 × 2.18 m, Ug = 1.0 W/m²K, warm-edge spacer, 150 mm sightline and 36 mm glazing. This is not the minimum 144 mm sightline combination. Ud describes the complete door and Uf the profile; window Uw is not substituted here.

Performance depends on dimensions, profile combinations, hardware and glazing. Each opening requires its own specification; catalogue maxima are not a guarantee for every element.

The table follows the manufacturer’s exact door variant. The global technical sheet supplies Ud and its reference conditions; the Ukrainian sheet is also linked.

Variant availability, hardware and delivery terms in Ukraine must be confirmed for the project. A catalogue listing does not imply stock availability.

DESIGN CHECKS

From a profile to a working element.

Separate from CS 77 windows

The Functional door leaf is 68 mm deep; the window version has different geometry. A shared series name does not make their specifications interchangeable.

Daily use

Before ordering, agree the opening direction, clear passage, hinges, lock and closer. Check the complete leaf weight against the chosen glazing and hardware; no unverified weight limit is stated.

Special variants

Fire-resistant, bullet-resistant and panel doors require their own profiles, infill and documentation. Functional specifications do not establish those properties.

Other Reynaers systems

START A PROJECT

Check this system for your project.

Send the opening dimensions, elevations and intended opening types. We will review glazing, hardware and installation requirements together.

Send your project ↗